We use cookies to personalize content and analyze traffic. We also share information about your use of our site with our social media, advertising, and analytics partners who may combine it with other information that you've provided or that we have collected from your use of our services. You consent to our cookies if you continue to use this website.

OK

Dake Corp

Have a question? Call us! 1-800-YES-DAKE
Share via email
Dake Hn 6220 V Vertical Full Beauty 2
Dake Hn 6220 V Table Detail Horizontal
Dake Hn 6220 V Notcher Block Horizontal
Dake Hn 6220 V Mitre Gauge Assembly Horizontal
Dake Hn 6220 V Table Mitre Gauge Horizontal
Photos (5) Videos (1)

Hydraulic Sheet Metal Notchers

Model DLN-6220V

4 Ga. mild steel cutting capacity

$20,995.00

This model hydraulic Notcher will cut notches from 30 to 140 degrees in mild steel and up to 6mm in thickness and will do this at a maximum rate of 15 strokes per minute. 24 Ton Capacity 4 Ga. Mild Steel, Cutting Length 8.5" x 8.5", Table dimension 37.4" x 31.2" Long 8.5” blades that can be resharpened many times for even more life. The blades have a negative rake to pull the material to the stops during the cut, for the best accuracy available. Blade angle is adjusted with the use of hand wheel and the notching stroke is controlled by a foot pedal.

PDF Manual (2.09 MB) PDF Parts List (403.59 KB)

Find our products at the following distributors:

Or, your local industrial distributor.

Have a question? Need spare parts? Contact us.

Specifications

Model Number DLN-6220V DLN-6200
Part Number 960401 960401 960400 960400
Maximum Material 4 Ga. (6mm/0.2242") 6 mm 4 Ga. (6mm/0.2242") 6 mm
Controls Foot pedal switch Foot pedal switch Foot pedal switch Foot pedal switch
Operation Handwheels and foot switch Handwheels and foot switch Foot Switch Foot Switch
Horsepower 4 HP three phase 220 volt 4 HP three phase 220 volt 4 HP three phase 220 volt 4 HP three phase 220 volt
Max Strokes Per Minute 15 Strokes per min. 15 Strokes per min. 15 Strokes per min. 15 Strokes per min.
Angle 30 - 140 Degrees 30 - 140 Degrees 90 Degree (fixed) 90 Degree (fixed)
Max Notch Dimensions 8.5" x 8.5" 215.90 mm x 215.9 mm 8.5" x 8.5" 215.90 mm x 215.90 mm
Table Dimensions 37.4" x 31" 950 x 795 mm 25.5" x 25.5" 650 x 650 mm
Overall Dimensions 38.58" x 36.61" x 5.12" 980 x 930 x 1400 mm 31.5" x 25.59" x 46.85" 800 x 650 x 1190 mm

Features

  • Variable angle

  • Capable of notches from 30 to 140 degrees in mild steel and up to 6mm in thickness

  • 15 Strokes per minute

  • 24 Ton Capacity 4 Ga. Mild Steel

  • Cutting length 8.5" x 8.5"

  • Table dimension of 37.4" x 31.2"

  • Long 8.5" blades

  • Hand wheel adjusted blade angle

  • Foot pedal controlled notching stroke

Model Options


Standard Equipment

  • Foot pedal switch

  • Long 8.5" blades