Dake Corp

Have a question? Call us! 1-800-YES-DAKE

Heavy Duty Bandsaws

Model JH10W1

10" X 18"

Heavy duty, American made, horizontal bandsaw with a dual cast head frame for large capacity cutting. Also featuring a three point suspension, adjustable eccentric roller blade guides, centralized controls, four-speed drive, 45º swivel vise jaws, and heavy 16” blade wheels.

dake logo with american flag
Made with pride in the USA

Find our products at the following distributors:

Or, your local industrial distributor.

Have a question? Need spare parts? Contact us.


Model Number JH10W1
Part Number 985017 985017
Capacity 10” rounds, 18” flats 254 mm rounds, 457.2 mm flats
Horsepower 1 1
Voltage 110V, Single Phase 110V, Single Phase
Maximum blade speed 270 fpm 83 mpm
Blade width 1" 25.40 mm
Blade length 137" 3,479.80 mm
Blade speeds 50/90/160/270 fpm 15/27/49/82 mpm
Solid round 90˚ capacity 10" 254 mm
Solid round 45˚ right capacity 7" 177.8 mm
Solid round 60˚ right capacity n/a n/a
Solid square 90˚ capacity n/a n/a
Solid square 45˚ right capacity n/a n/a
Solid square 60˚ right capacity n/a n/a
Solid rectangle 90˚ capacity 4 ½” x 18” 127 mm x 457.2 mm
Solid rectangle 45˚ right capacity 4" x 10" 101.6 mm x 254 mm
Solid rectangle 60˚ right capacity n/a n/a
Bed work (area) 11” x 18” 279.40 x 457.20 mm
Weight 935 lbs 424.11 kg
Height 75" 1905 mm
Floor space 30” x 65” 736.60 x 1,778.00 mm
Floor space left to right n/a n/a
Floor space front to back n/a n/a
Floor to bed 23 3/4” 603.25 mm


  • Heavy duty, American made medium production saw, comes with one standard Bi-metal blade.

  • Hydraulic controlled, gravity head feed, for hands free cutting. Hydraulically variable head feed control for regulation of head feeding rate. Machine automatically shuts off after cut is complete.

  • Cast two-piece head frame and large pivot bar, for extreme rigidity and long life.

  • Gear box is driven via “V” belt and step pulleys for fast speed changes.

  • Low voltage switches. Thermo over load protection, Magnetic starter switch low voltage protection.

  • Miters up to 45°

  • Vise has quick release for quick change over of material sizes.

  • Chip brush keeps the gullets of the blade clean.

  • Cast legs are of a three-point design. This unique design lets the machine sit flat, even on uneven floor surfaces.

  • The saw is fully guarded for operator safety.

Model Options

  • Casters (Set of 3)

  • Stock Stand

  • 24” Discharge Table

Standard Equipment

  • Vise

  • Magnetic Starter

  • Blade Tension

  • Frame Feed Control

  • Flood Coolant System