Dake Corp

Have a question? Call us! 1-800-937-3253

Elec-Draulic II Presses

Model 8-050

50 ton capacity


The 50 ton electric-hydraulic II dual acting press has a 2 horsepower motor, 8 IPM pressing speed, and is 86 inches tall. The dual acting ram allows for super-sensitive ram control with simple operation.

Specifications

8-050 8-200 8-150 8-080 8-075 8-025
Number 908050 908050 908200 908200 908150 908150 908080 908080 908075 908075 908025 908025
Capacity 50 tons pressing, 18 tons pulling 50 tons pressing, 18 tons pulling 200 tons pressing, 78 tons pulling 200 tons pressing, 78 tons pulling 150 tons pressing, 65 tons pulling 150 tons pressing, 65 tons pulling 75 tons pressing, 28 tons pulling 75 tons pressing, 28 tons pulling 75 tons pressing, 28 tons pulling 75 tons pressing, 28 tons pulling 25 tons pressing, 10 tons pulling 25 tons pressing, 10 tons pulling
Operation Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric
Horsepower 2 2 7-1/2 7-1/2 10 10 10 10 2 2 2 2
Voltage 220V/440V, 3-Phase 220V/440V, 3-Phase 230/460, 3 phase 230/460, 3 phase 220V/440V, 3-Phase 220V/440V, 3-Phase 220V/440V, 3-Phase 220V/440V, 3-Phase 220V/440V, 3-Phase 220V/440V, 3-Phase 220V/440V, 3-Phase 220V/440V, 3-Phase
Width between uprights 32-3/4" 831.85 mm 48" 1,219.20 mm 48" 1,219.20 mm 44" 1,117.60 mm 44" 1,117.60 mm 32-3/4" 831.85 mm
Width between table channels 7-1/4" 184.15 mm 18-3/8" 466.73 mm 12-1/4" 311.15 mm 8-1/4" 209.55 mm 8-1/4" 209.55 mm 7-1/4" 184.15 mm
Minimum ram to table 10-1/8" 257.18 mm 6" 152.40 mm 11-3/4" 298.45 mm 7-5/8" 193.68 mm 7-5/8" 193.68 mm 11-3/4" 298.45 mm
Maximum ram to table 45-1/8" 1,146.18 mm 30" 762.00 mm 31-3/4" 806.45 mm 37-5/8" 955.68 mm 37-5/8" 955.68 mm 46-3/4" 1,187.45 mm
Ram travel 10" 254.00 mm 16" 406.40 mm 16" 406.40 mm 10" 254.00 mm 10" 254.00 mm 10" 245.00 mm
Screw Travel n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a
Horizontal workhead travel n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a
Footprint 43-1/2" x 36" 1,104.90 x 914.40 mm 64" x 48" 1,625.60 x 1,219.20 mm 66" x 42" 1,676.40 x 1,066.80 mm 55-1/2" x 36" 1,409.70 x 914.40 mm 55-1/2" x 36" 1,409.70 x 914.40 mm 43-1/2" x 36" 1,104.9 x 914.40 mm
Height 86" 2,184.40 mm 106" 2,692.40 mm 95" 2,413.00 mm 86" 2,184.40 mm 86" 2,184.40 mm 83" 2,108.20 mm
Weight 1,360 lbs 616.89 kg 6,100 lbs 2,766.91 kg 3,620 lbs 1,642.00 kg 2,100 lbs 952.54 kg 1,950 lbs 884.51 kg 1,060 lbs 480.81 kg
Base 43-1/2" x 36" 1,104.90 x 914.40 mm 64" x 48" 1,625.60 x 1,219.20 mm 66" x 42" 1,676.40 x 1,066.80 mm 55-1/2" x 36" 1,409.70 x 914.40 mm 55-1/2" x 36" 1,409.70 x 914.40 mm 43-1/2" x 36" 1,104.9 x 914.40 mm
Ram advance speed n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a
Pressing speed 8 ipm 203.20 mm 8 ipm 203 mm/m 17 ipm 431.80 mm/m 30 ipm 762.00 mm/m 5 ipm 127.00 mm/m 15 ipm 381.00 mm/m
RPM 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800
Air Pressure n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

Features

  • Electric operation provides smooth, consistent pressing action.

  • Variable ram speed allows fingertip control of ram movement for precise control.

  • H-frame mounted control allows convenient control of press when workhead is out of operator’s reach.

  • Adjustable table permits easy vertical movement by means of self-locking hoist.

  • Double-acting cylinder permits pulling as well as pressing ram action

  • Safety valve protects against overloads.

  • T-ring seals prevent pressure loss.

Model Options

  • Traversing head

  • Bolt Flange Adaptor

Standard Equipment

  • Frame

  • 2 Steel V-Blocks

  • Flat Ram Nose

  • Pump

  • Safety Relief Valve

  • Self-locking Table Hoist

  • Double Acting Workhead

  • 2 Steel Table Plates

  • Pressure Gauge