Dake Corp

Have a question? Call us! 1-800-937-3253

Mitering Bandsaws

Model Zip 29

220V/440V 3-phase


Mitering horizontal bandsaw that will miter up to 60º to the right, and anywhere in between. Also featuring head down feed, multi-mode cutting, quick set cam-activated vises, direct drive, and a heavy cast head frame .Head down feed is gravity fed and controlled by way of an infinitely variable flow control valve. 

*440V model requires step-down transformer for operation (part number: 300674)

Specifications

Zip 29 TRAD 301 Zip 22
Number 974027 974027 974023 974023 974026 974026
Capacity 8-3/4" round 222.25 mm round 10-1/4" round 260.35 mm round 7" round 177.8 mm round
Horsepower 3/4 & 1-1/2 3/4 & 1-1/2 1-⅓ & 2 1-⅓ & 2 1 1
Voltage 220V/440V, 3-Phase 220V/440V, 3-Phase 220V/440V, 3 Phase 220V/440V, 3 Phase 110V, Single Phase 110V, Single Phase
Maximum blade speed 210 fpm 64 mpm 216 fpm 66 mpm 197 fpm 60 mpm
Blade width 1" 25.4 mm 1" 25.40 mm 3/4" 19 mm
Blade length 96-1/2" 2451 mm 108-1/4" 2,749.55 82" 2082.8 mm
Blade speed 105/210 fpm 32/64 mpm 108/216 fpm 33/66 mpm 197 fpm 60 mpm
Solid round 90˚ capacity 8-¾” 222.25 mm 10” 254.00 mm 7" 177.80 mm
Solid round 45˚ right capacity 6-¼” 158.75 mm 7-½” 190.50 mm 4-1/2" 114.30 mm
Solid round 60˚ right capacity 3-½” 88.90 mm 4-¼” 114.30 mm 2-¾” 69.85 mm
Solid square 90˚ capacity 7-⅞” 200.03 mm 9-¾” 247.65 mm 7" 177.80 mm
Solid square 45˚ right capacity 5-½” 139.70 mm 7" 177.80 mm 4-3/8" 111.13 mm
Solid square 60˚ right capacity 3-½” 88.90 mm 4-⅓” 110.07 mm 2-3/4" 69.85 mm
Solid rectangle 90˚ capacity 9-⅜” x 6-¼” 238.13 x 158.75 mm 11-¾” x 7” 298.45 x 177.80 mm 7-¾” x 6” 196.85 x 152.40 mm
Solid rectangle 45˚ right capacity 6” x 4-½” 152.40 x 114.30 mm 7-½” x 6-⅝” 190.50 x 168.28 mm 5” x 4-⅜” 127.00 x 111.13 mm
Solid rectangle 60˚ right capacity 3-½” x 4” 88.90 x 101.60 mm 7-½” x 6-⅝” 190.50 x 168.28 mm 2-¾” x 2-¾” 69.85 x 69.85 mm
Bed work (area) n/a n/a n/a n/a n/a n/a
Worktable height 38-½” 977.90 mm 37" 939.00 mm 36" 660.4 mm
Height 63" 1,600.20 mm 77" 1,955.80 mm 57" 1,447.80 mm
Floor space n/a n/a n/a n/a n/a n/a
Floor space left to right 55" 1,397.00 mm 47" 1,193.80 mm 51" 1,295.40 mm
Floor space front to back 29-1/2" 749.30 mm 79" 2,006.60 mm 29" 736.60 mm
Floor to bed 38-1/2" 977.9 mm 37" 939.8 mm 36" 914.4 mm

Features

  • Head down feed is gravity fed and controlled by way of an infinitely variable flow control valve. The flow control allows for presetting the down feed rate and retaining this setting at the end of the cut, to minimize dead air cutting.

  • Heavy cast head frame for rigidity

  • roller and carbide guides for optimum cutting quality.

  • Set the most appropriate blade and head descend speed according to the stock material, size and shape for maximum efficiency.

  • Multimode features allow 2 cutting modes; Manual, Manual with hydraulic down feed regulation, and automatic down feed

  • Direct drive system for full power to the drive wheel without horse power loss through belts and pulleys.

  • Quick set cam-activated vise.

  • Adjustable vise with handwheel for initial setup and quick release cam lever for repeat cutting.

Standard Equipment

  • Fabricated oversize steel base

  • Vises

  • Combination guides

  • CE Certified Electrical

  • Stock Stop

  • Coolant Pump

  • Direct Drive Gearbox

  • Door interlocks and end of cut shut off

  • Adjustable Manual Head Return

  • Material Support Roller

  • Mechanical Blade Tensioning

  • Multimode Feature

  • Head Feature