Dake Corp

Have a question? Call us! 1-800-937-3253

Mitering Bandsaws

Model TRAD 301

220V/440V 3-phase


Mitering horizontal bandsaw with heavy cast head frame for rigidity and roller and carbide guides for optimum cutting quality. Head down feed is gravity fed and controlled by way of an infinitely variable flow control valve. Multi-mode features allow two different cutting modes.

440V model requires step-down transformer for operation (part number: 300674)

Specifications

TRAD 301 Zip 29 Zip 22
Number 974023 974023 974027 974027 974026 974026
Capacity 10-1/4" round 260.35 mm round 8-3/4" round 222.25 mm round 7" round 177.8 mm round
Horsepower 1-⅓ & 2 1-⅓ & 2 3/4 & 1-1/2 3/4 & 1-1/2 1 1
Voltage 220V/440V, 3 Phase 220V/440V, 3 Phase 220V/440V, 3-Phase 220V/440V, 3-Phase 110V, Single Phase 110V, Single Phase
Maximum blade speed 216 fpm 66 mpm 210 fpm 64 mpm 197 fpm 60 mpm
Blade width 1" 25.40 mm 1" 25.4 mm 3/4" 19 mm
Blade length 108-1/4" 2,749.55 96-1/2" 2451 mm 82" 2082.8 mm
Blade speed 108/216 fpm 33/66 mpm 105/210 fpm 32/64 mpm 197 fpm 60 mpm
Solid round 90˚ capacity 10” 254.00 mm 8-¾” 222.25 mm 7" 177.80 mm
Solid round 45˚ right capacity 7-½” 190.50 mm 6-¼” 158.75 mm 4-1/2" 114.30 mm
Solid round 60˚ right capacity 4-¼” 114.30 mm 3-½” 88.90 mm 2-¾” 69.85 mm
Solid square 90˚ capacity 9-¾” 247.65 mm 7-⅞” 200.03 mm 7" 177.80 mm
Solid square 45˚ right capacity 7" 177.80 mm 5-½” 139.70 mm 4-3/8" 111.13 mm
Solid square 60˚ right capacity 4-⅓” 110.07 mm 3-½” 88.90 mm 2-3/4" 69.85 mm
Solid rectangle 90˚ capacity 11-¾” x 7” 298.45 x 177.80 mm 9-⅜” x 6-¼” 238.13 x 158.75 mm 7-¾” x 6” 196.85 x 152.40 mm
Solid rectangle 45˚ right capacity 7-½” x 6-⅝” 190.50 x 168.28 mm 6” x 4-½” 152.40 x 114.30 mm 5” x 4-⅜” 127.00 x 111.13 mm
Solid rectangle 60˚ right capacity 7-½” x 6-⅝” 190.50 x 168.28 mm 3-½” x 4” 88.90 x 101.60 mm 2-¾” x 2-¾” 69.85 x 69.85 mm
Bed work (area) n/a n/a n/a n/a n/a n/a
Worktable height 37" 939.00 mm 38-½” 977.90 mm 36" 660.4 mm
Height 77" 1,955.80 mm 63" 1,600.20 mm 57" 1,447.80 mm
Floor space n/a n/a n/a n/a n/a n/a
Floor space left to right 47" 1,193.80 mm 55" 1,397.00 mm 51" 1,295.40 mm
Floor space front to back 79" 2,006.60 mm 29-1/2" 749.30 mm 29" 736.60 mm
Floor to bed 37" 939.8 mm 38-1/2" 977.9 mm 36" 914.4 mm

Features

  • Head down feed is gravity fed and controlled by way of an infinitely variable flow control valve. The flow control allows for presetting the down feed rate and retaining this setting at the end of the cut, to minimize dead air cutting.

  • Heavy cast head frame for rigidity

  • roller and carbide guides for optimum cutting quality.

  • Set the most appropriate blade and head descend speed according to the stock material, size and shape for maximum efficiency.

  • Multimode features allow 2 cutting modes; Manual, Manual with hydraulic down feed regulation, and automatic down feed

  • Direct drive system for full power to the drive wheel without horse power loss through belts and pulleys.

  • Quick set cam-activated vise.

  • Adjustable vise with handwheel for initial setup and quick release cam lever for repeat cutting

  • Miter up to 60º to the right, and up to 45º left.

Standard Equipment

  • Fabricated oversize steel base

  • Vises

  • Combination guides

  • CE Certified Electrical

  • Stock Stop

  • Coolant Pump

  • Direct Drive Gearbox

  • Door interlocks and end of cut shut off

  • Adjustable Manual Head Return

  • Material Support Roller

  • Mechanical Blade Tensioning

  • Multimode Feature

  • Head Feature