Dake Corp

Have a question? Call us! 1-800-937-3253

Floor Model Drill Presses

Model SB-16

⅝" drill capacity


Floor model drill press featuring a locking handle hub, CE safety electrical package, a large diameter sturdy spindle, and massive cast head. Capable of quick bit changes and quick belt tension release for easy speed changes.

Specifications

SB-16 SB-250V SB-32V SB-25V SB-32 SB-25
Number 977200-1 977200-1 977700-1V 977700-1V 977400-1V 977400-1V 977600-1V 977600-1V 977400-2 977400-2 977300 977300
Drill capacity 5/8" 15.88 mm 1” 25.4 mm 1-¼” 31.75 mm 1” 25.40 mm 1-1/4” 31.75 mm 1” 25.40 mm
Horsepower 1/2 1/2 1.5 1.5 2 2 2 2 2 2 2 2
Motor 110V/220V/440V 110V/220V/440V 110V, Single Phase 110V, Single Phase 110V, Single Phase 110V, Single Phase 110V, Single Phase 110V, Single Phase 220V/440V; 3 Phase 220V/440V; 3 Phase 110V, Single Phase 220V/440V, 3 Phase 110V, Single Phase 220V/440V, 3 Phase
Spindle taper MT2 MT2 MT3 MT3 MT4 MT4 MT3 MT3 MT4 MT4 MT3 MT3
Working diameter 14-1/8” 358.78 mm 18” 111.00 mm 18” 111.00 mm 18” 111.00 mm 18” 111.00 mm 18” 457.2 mm
Number of speed 9 9 variable speeds variable speeds variable speeds variable speeds variable speeds variable speeds 9 9 9 9
Spindle speed range 240-3,400 rpm 240-3,400 rpm 68-1380 RPM 68-1380 RPM 46-3,473 rpm 46-3,473 rpm 46-3,550 rpm 46-3,550 rpm 270-2,290 rpm 270-2,290 rpm 270-2,000 rpm 270-2,000 rpm
Electrics CE 120-volt CE 120-volt 120V 1PH 120V 1PH 120V 1PH 120V 1PH 120V 1PH 120V 1PH CE 220/440-volt CE 220/440-volt CE 220/440-volt CE 220/440-volt
Weight 230 lbs 104.33 kg 483 lbs 219.09 kg 483 lbs 219.09 kg 397 lbs 180.08 kg 483 lbs 219.09 kg 397 lbs 180.08 kg
Spindle travel 3-1/8” 79.38 mm 5” 133.35mm 5-1/4” 133.35mm 5” 127.00 mm 5-1/4" 133.35 mm 5” 127.00 mm
Column diameter 3-1/8” 79.38mm 3-5/8” 92.08 mm 4” 92.08 mm 3-5/8” 76.2 mm 4” 101.60 mm 3-5/8” 76.2 mm
Table depth 11-3/4” 298.45 mm 15-3/4” 400 mm 15-3/4” 400 mm 13-3/4” 349.25 mm 15-3/4” 400.05 mm 13-3/4” 349.25 mm
Table width 11-3/4” 298.45 mm 15-3/4” 400 mm 15-3/4” 400 mm 13-3/4" 349.25 mm 15-3/4” 400.05 mm 13-3/4” 349.25 mm
Base depth 19-5/8” 498.48 mm 23-5/8” 600.08 mm 23-5/8” 600.08 mm 23-5/8” 600.08 mm 23-5/8” 600.08 mm 23-5/8” 600.08 mm
Base width 12-1/2” 317.50 mm 15” 381.00 mm 15” 381.00 mm 15” 381.00 mm 15” 381.00 mm 15” 381.00 mm
Spindle to table 28-1/2” 723.90 mm 28-3/8” 720.73 mm 26-1/4” max 666.75 mm max 28-3/8” 720.73 mm 26-1/8” 669.93 mm 28-3/8” 720.73 mm
Spindle to base 49-1/4” 1,250.95 mm 49-1/4” 1,250.95 mm 50” 1270 mm 50” 1,250.95 mm 50” 1,270.00 mm 50” 1,250.95 mm
Overall height 64” 1,625.00 mm 71” 1,803.40 mm 71” 1,803.40 mm 71” 1,803.40 mm 71” 1,803.40 mm 71” 1,803.40 mm

Features

  • A locking handle hub with convenient dial-in adjustment and an easy to read scale for fast, accurate, and repeatable depth setting changes.

  • Large diameter sturdy spindle for rigid drilling has four bearing points for smooth operation.

  • Bench and floor models both have machined table and base surfaces with t-slots for mounting and fixturing.

  • Quick release belt tensioning for fast, easy speed changes.

  • CE safety electrical package features push button on/off switch, emergency stop button, low voltage controls, thermal overload, and interlock safety switch for belt cover.

  • Massive cast head, machined column, and sturdy cast base reduces vibration.

  • Quick bit changes with standard Morse Taper (MT), common adaptors or standard keyed chuck.

  • Handle has 3 spokes with spring return for precise operator control and ergonomic operation.

Standard Equipment

  • 1/2” Keyed chuck

  • Drift for bit removal

  • Plexiglas chip and chuck guard