Dake Corp

Have a question? Call us! 1-800-937-3253

Automatic Cold Saws

Model Euromatic 370PP-L

14.5" blade


The Euromatic 370PP-L Non-Ferrous Automatic Cold Saw is user-friendly while offering aggressive precision and stamina. Featuring two removable surface wear plates, a head that rotates 45º right of center.

440V model requires step-down transformer for operation (part number: 300674)

Specifications

Euromatic 370PP-L Euromatic 370PP
Number 976210-2 976210-2 976208-2 976208-2
Voltage 220V/ 440V, 3 Phase 220V/ 440V, 3 Phase 220 volts/ 440 volts 220 volts/ 440 volts
Horsepower 3.5/4.5 3.5/4.5 3.5/4.5 3.5/4.5 kw
Cutting Ability Non-Ferrous/Plastic Non-Ferrous/Plastic Ferrous / Non-ferrous / Plastic Ferrous / Non-ferrous / Plastic
Maximum blade diameter 14-1/2” 368.30 mm 14-1/2” 368.30 mm
Maximum vise opening 8-1/4” 222.25 mm 8-1/4 ” 114.3 mm
Maximum feed vise opening 6-1/2” 165.10 mm 6-1/2” 165.10 mm
Maximum Angle 45° left 45° left 45° Left / 90° Right 45° Left / 90° Right
Slotting No No Yes Yes
Phase 3 3 3 3
Speeds 1500/3000 rpm 1500/3000 rpm 25/50 rpm 25/50 rpm
Weight 1,716 lbs 778.36 kg 1,716 lbs 778.36 kg
Solid round 90˚ capacity 4” 101.60 mm 4” 101.60 mm
Solid round 45˚ capacity 3-5/8” 92.08 mm 3-5/8” 92.08 mm
Tube 90˚ capacity 5-1/16” 128.59 mm 5-1/16” 128.59 mm
Tube 45˚ capacity 5” 127.00 mm 5” 127.00 mm
Square 90˚ capacity 4” 101.60 mm 4” 101.60 mm
Square 45˚ capacity 3-7/8” 98.43 mm 3-7/8” 98.43 mm
Rectangle 90˚ capacity 4” x 7” 101.60 x 177.80 mm 4” x 7” 101.60 x 177.80 mm
Rectangle 45˚ capacity 4” x 6” 101.60 x 152.40 mm 4” x 6” 101.60 x 152.40 mm
Work height 35” 889 mm 35” 889 mm
Height 90” 2286 mm 90” 2286 mm
Width 83” 2108.2 mm 83” 2108.2 mm
Depth 54” 1371.6 mm 54” 1371.6 mm

Features

  • Head rotates 45º right of center for miter cutting

  • Table features two removable surface wear plates to support longer cut lengths.

  • Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment.

  • Rear surface of the gearbox is machined with interlocking circles to evenly distribute oil over the ways.

  • Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm.

  • Minimum 6" remnant drop piece size for maximum material use.

  • Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute.

  • Manual oiler to lubricate 1" thick, hardened ways.

  • 3.5/4.5 HP motor has the muscle to drive a 14-1/2" or 12" blade quickly and quietly through solids.

  • Clear acrylic hood has shock assists for raising and lowering and electrical interlocks.

  • Swap cutting head to gain non-ferrous/ferrous option on same saw

Model Options

  • Ferrous cutting head

  • Outbound unloading table

  • 575V Transformer

  • 60” Roller Table

Standard Equipment

  • Blade

  • Coolant

  • Saw blade selector calculator

  • Tools kit for changing blades

  • Instruction and service manual