Machine Selection Matrix

Machine Selection Matrix

 
CUTTING APPLICATION MACHINE SELECTION MATRIX

Click here for the Cold Saw Matrix Legend.

    Cut Super
Cut 		Super
Technics 		Super
Technics 		OMP
Euromatic 		OMP
Euromatic 		OMP
Euromatic 		OMP
Euromatic
Cutting Requirements   250 275 350 350 SA 370 S 370 PP 370 PP/L 370 S/L
Mild steel solids 1 1/4" max X X X X X X    
Mild steel solids 2 1/8" max   X X X X X    
Mild steel solids 3 1/8" max     X X X X    
Mild steel solids 3 3/8" max     X X X X    
Mild steel solids 4 3/4" max         X X    
Mild steel solids 5 1/16" max         X X    
Tough Alloy Steel (Occasional)                  
Tough alloy steel up to 1" X X X X X X    
Tough alloy steel up to 1 1/2"   X X X X X    
Tough alloy steel up to 2"     X X X X    
Tough alloy steel up to 2 1/2"     X X X X    
Tough alloy steel up to 3 1/4"         X X    
Tough alloy steel up to 4"         X X    
Tough Alloy Steel (Production)                  
Tough alloy steel 1"-4"         X X    
Mild Steel Tube (Production)                  
Mild steel tube up to 2 3/4" X X X X X X    
Mild steel tube up to 3 3/8"   X X X X X    
Mild steel tube up to 4"     X X X X    
Mild steel tube up to 4 3/4"     X X X X    
Mild steel tube up to 5 1/16"         X X    
Tough alloy thin wall tube                
Tough alloy tube - 2 3/4" X X X X X X    
Tough alloy tube - 3 3/8"   X X X X X    
Tough alloy tube - 4"     X X X X    
Tough alloy tube - 4 3/4"     X X X X    
Tough alloy tube - 5 1/16"         X X    
Sq./Rect. Tubing (Production)                  
Mild steel 1 3/4" x 3 7/8" X X X X X X    
Mild steel 2 3/8" x 2 3/4"   X X X X X    
Mild steel 2 3/4" x 6"     X X X X    
Mild steel 3 1/8" x 4 3/4"     X X X X    
Mild steel 3 1/2" x 6 1/4"         X X    
Mild steel 4" x 6"         X X    
Non-Ferrous                  
Non-ferrous solid 2 /1/2" max @ 44 rpm @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous solid 2 7/8" max   @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous 3 5/8" max     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous solid 4 1/4" max     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous solid 5 1/16" max         @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-Ferrous Tubing                  
Non-ferrous tube up to 2 3/4" @ 44 rpm @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous tube up to 3 3/8"   @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous tube up to 4"     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous tube up to 4 3/4"     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous tube up to 5 1/16"         @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-Ferrous Extrusion                  
Extrusion 2" x 2 3/4" @ 44 rpm @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Extrusion 2 3/8" x 2 3/4"   @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Extrusion 2 3/4" x 6"     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Extrusion 3 1/8" x 4 3/4"     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Extrusion 3 1/2" x 6 1/4"         @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
NOTE: When cutting non-ferrous materials the Euromatic 370 PP/L-S/L with a precision ground blade at 3000 rpms, will give optimum finish.
WARNING: It is not advisable to run a high speed steel blade higher than 1500 rpms.
WARNING: Steel must not be cut on the PP/L or S/L models.

Click here for the Cold Saw Matrix Legend.

BACK to Cold Saws.


Purchase Online




Dake - Division of JSJ Corporation
724 Robbins Road · Grand Haven, MI 49417
Phone: 800.937.3253
Fax: 800.846.3253